Delta SA350K Manuale delle Istruzioni Scaricare il pdf (Pagina 3)

GENERAL SAFETY RULES

Failure to follow these rules may result in serious personal injury.

24.

1. FOR YOUR OWN SAFETY, READ THE INSTRUCTION

MANUAL BEFORE OPERATING THE MACHINE. Learning

the machine’s application, limitations, and specic hazards

will greatly minimize the possibility of accidents and injury.

2. WEAR EYE AND HEARING PROTECTION. ALWAYS USE

SAFETY GLASSES. Everyday eyeglasses are NOT safety

glasses. USE CERTIFIED SAFETY EQUIPMENT. Eye

protection equipment should comply with ANSI Z87.1

standards. Hearing equipment should comply with ANSI

S3.19 standards.

3. WEAR PROPER APPAREL. Do not wear loose clothing,

gloves, neckties, rings, bracelets, or other jewelry which may

get caught in moving parts. Nonslip protective footwear is

recommended. Wear protective hair covering to contain long

hair.

4. DO NOT USE THE MACHINE IN A DANGEROUS

ENVIRONMENT. The use of power tools in damp or wet

locations or in rain can cause shock or electrocution. Keep

your work area well-lit to prevent tripping or placing arms,

hands, and ngers in danger.

5. MAINTAIN ALL TOOLS AND MACHINES IN PEAK

CONDITION. Keep tools sharp and clean for best and

safest performance. Follow instructions for lubricating

and changing accessories. Poorly maintained tools and

machines can further damage the tool or machine and/or

cause injury.

6. CHECK FOR DAMAGED PARTS. Before using the machine,

check for any damaged parts. Check for alignment of

moving parts, binding of moving parts, breakage of parts,

and any other conditions that may affect its operation. A

guard or any other part that is damaged should be properly

repaired or replaced with DELTA® or factory authorized

replacement parts. Damaged parts can cause further

damage to the machine and/or injury.

7. KEEP THE WORK AREA CLEAN. Cluttered areas and

benches invite accidents.

8. KEEP CHILDREN AND VISITORS AWAY. Your shop is a

potentially dangerous environment. Children and visitors

can be injured.

9. REDUCE THE RISK OF UNINTENTIONAL STARTING.

Make sure that the switch is in the “OFF” position before

plugging in the power cord. In the event of a power failure,

move the switch to the “OFF” position. An accidental start-

up can cause injury. Do not touch the plug’s metal prongs

when unplugging or plugging in the cord.

10. USE THE GUARDS. Check to see that all guards are in

place, secured, and working correctly to prevent injury.

11. REMOVE ADJUSTING KEYS AND WRENCHES BEFORE

STARTING THE MACHINE. Tools, scrap pieces, and other

debris can be thrown at high speed, causing injury.

12. USE THE RIGHT MACHINE. Don’t force a machine or

an attachment to do a job for which it was not designed.

Damage to the machine and/or injury may result.

13. USE RECOMMENDED ACCESSORIES. The use of

accessories and attachments not recommended by DELTA®

may cause damage to the machine or injury to the user.

14. USE THE PROPER EXTENSION CORD. Make sure

your extension cord is in good condition. When using an

extension cord, be sure to use one heavy enough to carry

the current your product will draw. An undersized cord will

cause a drop in line voltage, resulting in loss of power and

overheating. See the Extension Cord Chart for the correct

size depending on the cord length and nameplate ampere

rating. If in doubt, use the next heavier gauge. The smaller

the gauge number, the heavier the cord.

15. SECURE THE WORKPIECE. Use clamps or a vise to hold

the workpiece when practical. Loss of control of a workpiece

can cause injury.

16. FEED THE WORKPIECE AGAINST THE DIRECTION OF

THE ROTATION OF THE BLADE, CUTTER, OR ABRASIVE

SURFACE. Feeding it from the other direction will cause the

workpiece to be thrown out at high speed.

17. DON’T FORCE THE WORKPIECE ON THE MACHINE.

Damage to the machine and/or injury may result.

18. DON’T OVERREACH. Loss of balance can make you fall

into a working machine, causing injury.

19. NEVER STAND ON THE MACHINE. Injury could occur if

the tool tips, or if you accidentally contact the cutting tool.

20. NEVER LEAVE THE MACHINE RUNNING UNATTENDED.

TURN THE POWER OFF. Don’t leave the machine until it

comes to a complete stop. A child or visitor could be injured.

21. TURN THE MACHINE “OFF”, AND DISCONNECT THE

MACHINE FROM THE POWER SOURCE before installing

or removing accessories, changing cutters, adjusting or

changing set-ups. When making repairs, be sure to lock the

start switch in the “OFF” position. An accidental start-up

can cause injury.

22. MAKE YOUR WORKSHOP CHILDPROOF WITH

PADLOCKS, MASTER SWITCHES, OR BY REMOVING

STARTER KEYS. The accidental start-up of a machine by a

child or visitor could cause injury.

23. STAY ALERT, WATCH WHAT YOU ARE DOING, AND

USE COMMON SENSE. DO NOT USE THE MACHINE

WHEN YOU ARE TIRED OR UNDER THE INFLUENCE

OF DRUGS, ALCOHOL, OR MEDICATION. A moment of

inattention while operating power tools may result in injury.

USE OF THIS TOOL CAN GENERATE

AND DISBURSE DUST OR OTHER AIRBORNE

PARTICLES, INCLUDING WOOD DUST, CRYSTALLINE

SILICA DUST AND ASBESTOS DUST. Direct particles

away from face and body. Always operate tool in well

ventilated area and provide for proper dust removal.

Use dust collection system wherever possible.

Exposure to the dust may cause serious and permanent

respiratory or other injury, including silicosis (a serious

lung disease), cancer, and death. Avoid breathing the

dust, and avoid prolonged contact with dust. Allowing

dust to get into your mouth or eyes, or lay on your skin

may promote absorption of harmful material. Always

use properly fitting NIOSH/OSHA approved respiratory

protection appropriate for the dust exposure, and wash

exposed areas with soap and water.

1 2 3 4 5 6 7 8 ... 31 32

Commenti su questo manuale

Nessun commento

Delta SA350K Manuale delle Istruzioni Pagina 3

Commenti su questo manuale

Prodotti e manuali riguardandi Levigatrici elettriche Delta SA350K