Delta DP400 Manuale Utente Scaricare il pdf (Pagina 14)

Fig. 24

3. The table can be tilted right or left by pulling out and

removing table alignment pin (C) Fig. 24. NOTE: If pin (C)

is difficult to remove, turn nut (E) clockwise to pull pin

out of casting.

4. Fig. 25, illustrates the table alignment pin (C)

removed. Loosen table locking bolt (D), tilt table to the

desired angle and tighten bolt (D). When returning table

to the level position, replace table alignment pin (C). This

will position the table surface at 90 degrees to the

spindle.

5. A tilt scale (E) Fig. 26, is provided on the table

bracket casting to indicate the degree of tilt. A witness

line and zero mark (F) are also provided on the table to

line up with the scale (E).

Fig. 25

Fig. 26

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20 21

Nessun commento

Delta DP400 Manuale Utente Pagina 14