Delta 23-655 Manuale Utente Pagina 1

INSTRUCTION MANUAL6" Variable Speed Grinder /Sharpener(Model 23-655)PART NO. 901917 (014)Copyright © 2001 Delta MachineryESPAÑOL: PÁGINA 11To lea

2GENERAL SAFETY RULESWoodworking can be dangerous if safe and proper operating procedures are not followed. As with all machinery, thereare certain ha

3ADDITIONAL SAFETY RULES FOR GRINDERS1. DO NOT OPERATE your tool until it is completelyassembled and installed according to the instructions.2. IF YOU

4UNPACKING AND CLEANINGCarefully unpack the tool and all loose items from the shipping container(s). Remove the protective coating from allunpainted s

5ASSEMBLYTOOL RESTS1. Assemble left tool rest (A) Fig. 3, to left tool rest arm(B), as shown, and fasten with one 5/16-18x3/4" knobhead screw (C)

62. Align the holes in the eye shield with the holes in thespark guard and place the eye shield spacer (A) Fig. 7, inthe space in the spark guard as s

7EXTENSION CORDSUse proper extension cords. Make sure your extensioncord is in good condition and is a 3-wire extension cordwhich has a 3-prong ground

8STARTING ANDSTOPPING GRINDERThe switch (A) Fig. 14, is located on the front of thegrinder. To turn the grinder “ON” move the switch to theup position

9CHANGING GRINDINGWHEELS1. CAUTION: DISCONNECT TOOL FROM POWERSOURCE.2. When changing wheels, remove the screwsattaching the side covers to the grinde