Delta 36-L336 Manuale di Manutenzione e Cura Scaricare il pdf (Pagina 9)

UNPACKING AND CLEANING

Carefully unpack the machine and all loose items from the shipping container(s). Remove the rust-preventative oil from

unpainted surfaces using a soft cloth moistened with mineral spirits, paint thinner or denatured alcohol.

Do not use highly volatile solvents such as gasoline, naphtha, acetone or lacquer thinner for cleaning your

machine.

After cleaning, cover the unpainted surfaces with a good quality household floor paste wax.

12. Anti-kickback assembly

13. Special arbor nut

14. Blade guard assembly

15. Arbor wrench

16. Push stick

17. T-handle 5/32 hex

wrench

REMOVE SHIPPING FOAM

1. Open the motor cover (A) Fig. 1. First, remove the

hex socket head screw (B) with a 5/16 hex wrench.

2. Press firmly just above the recessed area on side of

cover at (Z) Fig. 1 with the palm of your hand and the

motor cover should rotate to the left.

3. Turn blade raising wheel (C) Fig. 2 and raise the

arbor.

4. This will raise the motor (D) Fig. 3 out of the way of

the foam block (E).

5. Remove foam block.

6. Remove reducer. (Located next to foam block.)

FIG. 2

FIG. 1

FIG. 3

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 107 108

Nessun commento

Delta 36-L336 Manuale di Manutenzione e Cura Pagina 9