Delta D25886 Manuale Utente Scaricare il pdf (Pagina 126)

100

101

4. Motion Control Instructions

DVP-MC operating manual 4-85

6. Introduction to Mask

<1> As the figure shows below, one position capture is completed after the trigger times for rising

edge of the TriggerInput bit reach Mask value when Windowonly=1, “Execute” turns Off -> On, and the

actual position of terminal actuator is within the Window zone; The trigger of rising edge of the

TriggerInput bit is invalid when the actual position of terminal actuator is out of the Window zone.

When the actual position of the terminal actuator exceeds LastPos and no position is captured,

the “Error” bit of CapturePosition instruction is on; position capture could be done again by

triggering of the rising edge of “TriggerInput” bit after “Execute” turns Off -> On again.

<2> When Windowonly=0 and “Execute” turns Off -> On, one position capture is completed after

the trigger times for rising edge of the TriggerInput bit reach Mask value (Mask=0 or 1, one position

capture is completed after the triggering of the rising edge of the TriggerInput bit occurs once).

1 2 ... 121 122 123 124 125 126 127 128 129 130 131 ... 338 339

Commenti su questo manuale

Nessun commento

Delta D25886 Manuale Utente Pagina 126

Commenti su questo manuale

Prodotti e manuali riguardandi Compressori d'aria Delta D25886