Delta RMC70 Manuale Utente Scaricare il pdf (Pagina 16)

RMC70 Startup Guide

14 Delta Computer Systems, Inc.

6. Browse to Motion Commands,

then Open Loop.

Choose the Direct Output

command and click OK.

7. For the Direct Output command

parameters, enter the following:

 Output: 0.1

 Ramp Rate: 100

When you send the command in the

next step, the Control Output voltage

will ramp to 0.1 V at a rate of 100

V/sec.

USE THE DIRECT OUTPUT COMMAND WITH CAUTION!

IT DISABLES THE SAFETY FEATURES OF THE RMC!

Fault Controller

Button

If the motion causes problems, be prepared to quickly stop the

axis by clicking the Fault Controller button on the toolbar, or

pressing Ctrl + K on the keyboard.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 47 48

Nessun commento

Delta RMC70 Manuale Utente Pagina 16